Header banner
Revain logoHome Page
sg-55 ag-60 plasma cutter torch head body 40amp - 60amp accessories consumable kit (1.2mm tip, 50pcs 60 amp) logo

SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp) Review

6

·

Average

·

$$
Revainrating 3.5 out of 5  
Rating 
3.3
🔨 Welding Equipment, 🔨 Welding & Soldering

View on AmazonView on ЯM

Media

(4)
img 1 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 2 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 3 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 4 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)

Photos by authors

(6)
img 5 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 6 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 7 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)
img 8 attached to SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)

Description of SG-55 AG-60 Plasma Cutter Torch Head Body 40Amp - 60Amp Accessories Consumable Kit (1.2Mm Tip, 50Pcs 60 Amp)

The consumables can work with torches SG-55 ,AG-60 and WSD-60 for CUT-60,LGK-60 plasma cutting machines. Also,those consumables work for machines of brands such as Rilon,Riland,Jasic, Mitech, Chiry, Krypton, Longetivity Forcecut 40D, etc. 20pcs Tip 1.2 60Amp. 20pcs Electrodes. 10pcs Ceramic shield cups

Reviews

Global ratings 6
  • 5
    3
  • 4
    0
  • 3
    1
  • 2
    1
  • 1
    1

Type of review

Revainrating 3 out of 5

Quality but should come with multiple sizes of guide wheels.

Everything is made very nice. Good quality. Only problem I have with it is the guide wheels on the head are too large of diameter. The tip of my torch is too far away from the metal for the arc to jump to it. So, I had some made at work today that are perfect. I went with 1 1/4” diameter versus the 1 3/8” that came with it. That’s the only reason I gave it 3 stars. Otherwise it probably would have been 5.

Pros
  • muy buen producto, terminado de primera calidad.
Cons
  • Only compatible with certain plasma cutters, limiting its usefulness

Revainrating 2 out of 5

That's not to bad. However

I have an LT-60 torch that came with the LTP7000 amp plasma cutter. I cannot seem to find the correct consumables for this gun. I ordered this and the metal parts are the same however the ceramic cups are not the same as the originals. The ceramic cups are too short and the do not fit over the end of the gun.I checked into getting the correct gun for this plasma cutter it was $120. That's not to bad. However, the consumables were $160 and that was for a small amount. I suppose they have some…

Pros
  • Great dual purpose tool. Use to cut circles but also works great using head free style
Cons
  • It’s doesn’t hold firm

Revainrating 5 out of 5

Modified to make it work. Great now.

Well built but a little too large for the AG-60 torch. Inside diameter was to loose but only came with two set screws, I drilled and tapped two additional holes, now I have three screws at 120 degrees apart and added slightly longer screws to center it. Have not used it yet but it is steady and doesn’t rock as with only two screws. Also changed to smaller washers to put the tip at 1/8” from the work surface. Gave it a try on 1/4” plate and works like a charm.

Pros
  • This product was a perfect fit for the Amico Cut 50 plasma cutter.
Cons
  • Didnt fit. Im sure it was listed to fit

Revainrating 1 out of 5

Does not work on CUT50P Plasma Cutter

I was hoping that these would work since they are advertised as working with an AG-60 torch. The pink cups will not screw on. They are not even the correct style. The electrode and cap seem to have too much internal clearance and do not reliably create a High Frequency Arc.

Pros
  • La calidad muy buena
Cons
  • Had to return did not fit my needs

Revainrating 5 out of 5

Good quality and price

Great price for the tips and they last a good amount of time. That's my feedback. I had no problem cutting 1/2" and 5/8" steel.

Pros
  • This tool would be a deal at twice the price. Works great and well constructed.
Cons
  • It's a little flimsy

Revainrating 5 out of 5

Tools are always needed !

The product functions as needed and was easy to use. I made adapter rings for my etrike/dog wagon, mounting pulleys to hub motors (producing electricity).

Pros
  • Works great! Made cutting so easy and accurate
Cons
  • Did not fit my application. My fault