SATA to Molex Power Cable - BENFEI 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches, Improved SEO Review

The only problem I had was that the ends of the adapter were difficult to insert into the mains plug as they were too tight. But they walked with difficulty.

When I got this cable kit it worked well when installing a USB-C hub and gave it the extra power it needed to make devices work better, like my Logitech Streamcam with a higher frame rate. I really like the design as it is a durable cable that will not cause any problems for the first few weeks of use. We highly recommend purchasing this cable set if you need to upgrade your desktop PC from SATA to Molex power. Worth buying.

Arrived on time and works perfectly. My only issue is that the pins don't line up very well, so you'll need to get them together somehow. And luckily in my situation it's on the hidden side when my case because the ketchup and mustard wires are a bit ugly but hey works fine and a decent price for 3 of them.

These are good cables and delivered quickly. Just make sure you need a Molex FEMALE connector. I had to power the SSD directly from the Molex power connector on my Mini-ITX motherboard. My mistake, I actually need MALE Molex connectors because the motherboard uses a Molex power connector. Luckily I already had an adapter to convert a female to male Molex.

Cable adapter fits my needs well. The OEM power cables had adequate connectors, but the spacing between connectors did not allow for the connection of all drives in a mid-tower PC case. The adapters allowed unused Molex connectors to be used while increasing cable length. Has worked as it should.

I used one of these to replace one from another vendor. The 4-pin Molex connector's terminals did not fit into the housing and were very loose. This made aligning the pins to connect very difficult. This product had the correct housing and terminal block. Connecting was much easier. Looks like a well made cable. Very satisfied.

I'm sure it's a very good cable - I've had good experiences with Benfei in the past - but as many said. Make sure you don't get your cable back. Not that I would have.

These molex to sata cable adapters work and are of decent quality but they don't have a locking latch as shown in the last photo on the product page. That means they're all too easy to accidentally pull from the drive they're attached to. A problem that has bitten me several times in the past. The latch was the reason I chose her over others at Revain.

These are good cables and they ship quickly. Just make sure you need a Molex FEMALE connector. I had to power the SSD directly from the Molex power connector on my Mini-ITX motherboard. My mistake, I actually need MALE Molex connectors because the motherboard uses a Molex power connector. Luckily I already had an adapter to convert a female to male Molex.

When I received this cable set, it worked well after installing a USB-C hub, giving it the extra power it needed to make devices like my Logitech Streamcam work better at higher frame rates. I really like the design as it is a durable cable that will not cause any problems for the first few weeks of use. We highly recommend purchasing this cable set if you need to upgrade your desktop PC from SATA to Molex power. Worth buying.