Review on DashSkin USA Molded Dash Cover Compatible With 97-00 GM SUVs And 97-98 Pickups In Black - Made In America by Chase Steele

When I dry fit the skin to the dash, it was such a perfect Fit that I almost could not get it off to apply the adhesive. I was honestly a little skeptical at first but after the dry fit, I knew there would be no issues in getting it in. The key to a perfect fit is making sure it is pressed down in all areas as the glue tends to not spread out unless it is pressed. Weight on the skin, Masking Tape, Foam wedges on each end with doors closed and cardboard wedges next to the windshield helped. I also drilled out the three OEM holes next to the windshield so IF the dash ever had to come out, the OEM Dash, New skin and all will come out as one unit. I recommend making sure you repair as best you can the OEM dash so the skin has good support underneath. The pictures show the bezel around the instrument cluster and Radio off, I was also installing a new Head Unit but you would not normally have to remove the Bezel to install the skin just pull it out about one eight of an inch to let the edge slip in. That's All, I Highly Recommend it (I am terribly picky about things so if it pleases me it should please most other people). Rf of TN