Header banner
Revain logoHome Page
Stanislaw Gluszek ᠌ photo
1 Level
360 Review
0 Karma

Review on 💥 ASRock X570 Phantom Gaming 4AM4/USB3.2/HDMI/RJ45 Motherboard: Superior Performance and Connectivity by Stanislaw Gluszek ᠌

Revainrating 5 out of 5

Excellent product, the best quality.

worked with the 3800X for two years; the 5950X is now installed. Standard power settings, a load on all cores, and a bus of individual cores up to 4.9 MHz all securely maintain 4.5 MHz. Southbridge is hot. The south bridge's temperature increased to 58 degrees, and the cooler speed was 2022. 2060super partially blocked it. The 3080Ti completely covers the southbridge, the temperature increases to 64 degrees, the chipset cooler runs at 2500–3000 rpm, it is silent, and there are no crashes or restarts. They claim that it performs poorly when using RAM with 4 slots, especially dual-rank. But in AMD Stones, it functions more like a memory controller. In the A2B2 xmp slots profile 3200MHz 16-18-18-36 dual mod, there existed HyperX 2 * 16 memory. Write/read speed of 47,000–48, 000 mb/s. Later, after installing the new modules with one xmp profile 3000MHz 16-18-18-38, I added two extra brackets to slots A1B1. The motherboard provided options for the first set of xmp profiles, with all four modules starting at a frequency of 3200. Only 2% slower read/write speeds (46000–47000 mb/s) were observed. For several hours, the full memory has been tested with memtest pro 7.0; there have been no mistakes. The success of PCI-E 4.0 3080Ti is its proper operation. for disks, two m2 slots. Both of us are busy. The disk can be loaded up to 60 degrees with a loaded vidyakha in the top slot, which is only PCI-E4.0 and is situated directly beneath the vidyakha. bottom sata/pci-e 4.0 slot. There are pci-e3.0 a-data s11 drives in both slots. The reading speed for the upper one is 3500 while for the bottom one it is 3200; this is probably because the top one has shorter tracks. I won't say anything noteworthy about Sata; it is effective. Without any objections, six of the eight spaces were filled at one point. In order to regulate 3pin coolers, the mother must be able to perceive their speed. There are presets and manual settings for each cooler independently. There are two connectors for a CPU cooler and three connectors for case coolers, all of which are 4pin and all of which can modify pwm and voltage. There are two RGB backlight control ports, one for A-RGB, and a connector for the exclusive cooler used by AMD. several connectors, including USB connectors.

Pros
  • A good manufacturer at a fair price. Not my first time using an asrok mama. This one has been functional for two years with no issues.
Cons
  • It wasn't located.